Individual Project Ansys workbench I would like to get the written report i will include the graph | Solution Aider

I would like a report to be written:
Part 1- Beam under 3-Pt Bending: We want to simulate a beam under three-point bending with a force F applied at the center as shown in Figure 1.
Figure 1: Beam under three-point bending

The following geometry and material data are required to model our problem:

Don't use plagiarized sources. Get Your Custom Essay on
Individual Project Ansys workbench I would like to get the written report i will include the graph | Solution Aider
Get an essay WRITTEN FOR YOU, Plagiarism free, and by an EXPERT! Just from $10/Page
Order Essay

F = 500,000 N Applied force

L = 2,000 mm Length of the beam

h = 60 mm Height of the beam cross section

t = 20 mm Thickness of the beam cross section

E = 210,000 N/mm2 Young’s modulus

ν = 0.3 Poisson’s ration

(a) Plot the deformation, equivalent stress, equivalent elastic strain, and shear stress.

(b) Remodel the case with the applied load of 1e6 N, and compare the max principal stress with the previous case.

Part 2- Ceramic, polymer and composite beam under 3-Pt Bending:

For the following ceramic, polymer and composites model the same geometry with the same applied force of F = 500,000 N and plot the stress distribution in the specimens. You can also use the Ansys database for Silicon, Polyethene, and honeycomb.

start here guidelines and Contents for an Analysis Report

Abstract: An abstract is a short summary of your research project, usually about a paragraph (c. … an abstract prepares readers to follow the detailed information, analyses, and arguments in your full paper; and, later, an abstract helps readers remember key points from your paper.

Key words: Keywords are words that capture the essence of your paper. Keywords make your paper searchable and ensure that you get more citations. Therefore, it is important to include the most relevant keywords that will help other authors find your paper.

Introduction and Problem Description: Description of the objectives of the analysis. Describe the failure criteria or engineering requirements against which the analysis will be compared. Include a physical description of the part to be analyzed. The overall dimensions, material, loading conditions, and description of the operation or application of the part should be included. Obviously, a sketch of the part is helpful.

FEA Code: Brief summary of the finite element program and computer system used for the analysis

Model Description and Assumptions: Include plots of the finite element model and a description of types of elements used, boundary conditions, applied loads and relevant engineering assumptions.

Results and Analysis: Include the important results (displacement, mode shape, thermal, and/or stress contour plots). A discussion should be accompanied these plots, describing the behavior of the model and how it relates to the actual expected behavior of the part. Include tables showing the stresses and displacements (if structure analysis) for critical sections of the model. Include hand calculations, theoretical solutions and/or experimental results supporting the finite element results. A brief discussion of these calculations along with references should be included. For long results or discussions that detract from the flow of the main report, include parts of this section as an appendix to the main body of the report.

Conclusions and recommendations: Describe what was learned from the analysis and what conclusions can be drawn. Summarize the results in conjunction with the failure criteria or engineering requirements. If the analysis shows an inadequate design, recommendations for design modifications would be included in this section.

References: Your reference list should appear at the end of your paper. It provides the information necessary for a reader to locate and retrieve any source you cite in the body of the paper. Each source you cite in the paper must appear in your reference list; likewise, each entry in the reference list must be cited in your text.

The importance of thorough documentation (and judicious use of appendices) cannot be overemphasized. First, documentation is required to support the design or analysis decisions resulting from the finite element analysis. Second, and of equal importance, the process of preparing the report forces you to check all aspects of your analysis. Even if your work situation does not require a formal report, it is strongly recommended that you go through the process described above as a means of checking your analysis. Reports should include enough detail that an experienced analyst could completely reproduce your results from reading the report alone.

Place your order
(550 words)

Approximate price: $22

Calculate the price of your order

550 words
We'll send you the first draft for approval by September 11, 2018 at 10:52 AM
Total price:
The price is based on these factors:
Academic level
Number of pages
Basic features
  • Free title page and bibliography
  • Unlimited revisions
  • Plagiarism-free guarantee
  • Money-back guarantee
  • 24/7 support
On-demand options
  • Writer’s samples
  • Part-by-part delivery
  • Overnight delivery
  • Copies of used sources
  • Expert Proofreading
Paper format
  • 275 words per page
  • 12 pt Arial/Times New Roman
  • Double line spacing
  • Any citation style (APA, MLA, Chicago/Turabian, Harvard)

Our guarantees

Delivering a high-quality product at a reasonable price is not enough anymore.
That’s why we have developed 5 beneficial guarantees that will make your experience with our service enjoyable, easy, and safe.

Money-back guarantee

You have to be 100% sure of the quality of your product to give a money-back guarantee. This describes us perfectly. Make sure that this guarantee is totally transparent.

Zero-plagiarism guarantee

Each paper is composed from scratch, according to your instructions. It is then checked by our plagiarism-detection software. There is no gap where plagiarism could squeeze in.

Free-revision policy

Thanks to our free revisions, there is no way for you to be unsatisfied. We will work on your paper until you are completely happy with the result.

Privacy policy

Your email is safe, as we store it according to international data protection rules. Your bank details are secure, as we use only reliable payment systems.

Fair-cooperation guarantee

By sending us your money, you buy the service we provide. Check out our terms and conditions if you prefer business talks to be laid out in official language.