Designing and Developing Products for the Internet of Everything (IoE)-Coursework Brief
| Academic year and term: | 2021-2022-Semester 2- Year 3 |
| Module title: | Designing and Developing Products for the Internet of Everything (IoE) |
| Module code: | QAC020X355S |
| Module Convener: | Amjad Alam |
| Learning outcomes assessed within this piece of work as agreed at the programme level meeting | On successful completion of the module students will be able to:
1. Critically appraise knowledge-based relating to the use of Internet of Everything, including (passive and active) sensors, actuators, the physical communications layer, communications protocols, programming frameworks, and an understanding of energy and bandwidth constraints. 2. Evaluate design approaches used to design Internet of Everything applications. 3. Design and build a sensor network based on Internet of Everything technology. 4. Develop application software of moderate complexity for a well-used mobile platform. 5. Discuss current research issues and application areas of the Internet of Everything and mobile devices, including an understanding of the commercial context and privacy/security issues, and make well-informed speculations on the future of the area.
|
| Type of assessment: | 1. Individual Systems Design Report (2500 words including system design documentation) (this will assess learning outcomes 2, 3 and 4). |
| Assessment deadline: |
Coursework: Individual Assessment – 40%
Assignment Report 40% (2500 words): A comprehensive report for this assignment based upon a realistic scenario need to be produced by every Individual.
System Design Report to be submitted by every Individual 25/03/22 (no later than 2pm). This should be submitted via Turnitin as a Microsoft Word file (see the deliverables required in coursework 1)
|
Kind reminder: You MUST make a reasonable attempt at your assignment and submit it. Failure to do so may result in CAPPED Resit and/or failure of the module.
It is also student’s full responsibility to ensure that all assignments are submitted on the correct link and on time before the submission date. |
|
Assignment Support
| How will your work be assessed?
Your work will be assessed by a subject expert who will use the marking grid provided in this assessment brief. When you access your marked coursework, it is important that you reflect on the feedback so that you can use it to improve future assignments.
How will feedback be provided?
Students will have access to formative feedback on each task set in workshops, thereby helping them to refine their approach to the summative tasks that have been set. However, please note that this feedback is limited to recommendations on improving your work. Lecturers will not confirm any grades or marks. The feedback can be one-to-one or in-group sessions.
|
| Assignment support:
Although you will be guided throughout the module by your lecturer, you can get extra support for your assignment, just make an appointment with the ACE team for any language, research and study skills issues and/or talk, email the Computing ACE expert for any advice on how to approach your assignment. REMEMBER: they are not here to give you the answers!
|
Expectations: Every individual should analyse and design a suitable solution using any IoT development board like raspberry pi/ Arduino/ ESP32/ ESP8266, etc and different services/ sensors. Note: You can plan and choose any IOT board and any sensors. This assignment will assess module learning outcomes 2, 3 and 4.
Rationale: The report should demonstrate understanding of industry-based challenges given below. The awareness of various types of solutions should be shown and recommendations for potential solutions should be based on justified arguments. You should demonstrate how theories can be applied. The robustness and correctness of the system should be tested, and performance should be evaluated with known and innovative technological solutions. You should reflect upon measures/steps taken to incorporate ethical, accessibility and usability standards in the developed system and the resultant implications.
Suggested requirements for the assignment: Raspberry pi/ Arduino/ ESP32/ ESP8266. You can also develop and test the whole system in simulation software like Tinkercad or Proteus or Wokwi with any programme language, connectivity network, output devices (i.e. LED/ MQTT Lens, I2C or SPI LCD or even Serial Monitor).
Coursework Brief
The Scenario – IoE
You need to build a complete IoT system that can have real life application related to home, healthcare, transportation, and community, etc. For example, one can create a system that can measure and monitor humidity & temperature of home, measuring distance between the two objects, creating a Burglar alarm or any other security system.
For this development, you need to develop a system using at least 1 esp32/ Arduino/ raspberry pi, 1 sensor device (any active or passive sensor) and 1 output device (Serial monitor/ LCD/ LED/ MQTT lens). Finally, you should also make use of wireless communication using either Wi-Fi or Bluetooth.
Specific Deliverables: The lab report should include the following:
Delivering a high-quality product at a reasonable price is not enough anymore.
That’s why we have developed 5 beneficial guarantees that will make your experience with our service enjoyable, easy, and safe.
You have to be 100% sure of the quality of your product to give a money-back guarantee. This describes us perfectly. Make sure that this guarantee is totally transparent.
Each paper is composed from scratch, according to your instructions. It is then checked by our plagiarism-detection software. There is no gap where plagiarism could squeeze in.
Thanks to our free revisions, there is no way for you to be unsatisfied. We will work on your paper until you are completely happy with the result.
