FIR4311 Columbia Southern Unit VI Fire Surpassing System PPT Presentation please see attached for OSHA Standards Assessment which is seperate from the powerpoint thank you.InstructionsYour municipality is considering adoption of several modifications to the
current fire code for all commercial buildings over 4,000 square feet.
Specifically of interest to you, the primary modification will require the
installation, maintenance, and inspection of the appropriate fire protection
system for each type of commercial business. As the fire inspector, you have
been asked to come to the next city council meeting to educate the members on
the matter. Prepare a 10- to 15-slide PowerPoint presentation that includes information
on the installation, maintenance, and inspection of each of the following
types of fire suppression systems: Automatic sprinkler systems Wet-pipe sprinkler systems Dry-pipe sprinkler systems Preaction sprinkler systems Deluge sprinkler systems Dry-chemical extinguishing systems Wet-chemical extinguishing systems Clean-agent extinguishing systems (halogenated agents) Carbon dioxide extinguishing systems Remember that the city council members are laypeople, so be sure to
include pictures and explain any technical information that may be confusing
for them. You are encouraged to include information regarding the economic
impact of this code adoption. You may also use the information in your textbook. Your presentation
should include at least two references to support discussion. Be sure to cite
any sources used in a reference slide, using proper APA formatting. The title
and reference slides do not count towards the slide-count requirement. Question 1
1. Under what circumstances are employers required to train employees in first aid?
When hazardous chemicals are being used
When air contamination levels are above permissible limits
When there is no adequate medical treatment facility in near proximity to the workplace
Because all employers must train 10% of their personnel in first aid
8 points
Question 2
1. Periodic inspections of lockout/tagout procedures must be performed at least __________ in
order to ensure that the energy control procedures continue to be implemented properly and
that employees are familiar with their responsibilities under those procedures.
quarterly
semi-monthly
semi-annually
annually
8 points
Question 3
1. Which of the following is NOT included as an appendix to 1910.146?
Permit-required confined space decision flow chart
Procedures for atmospheric testing
An example of permit-required confined space signage
Confined space pre-entry checklist
8 points
Question 4
1. 29 CFR 1910.147(c)(4)(ii) requires that __________.
all pieces of equipment be locked out in a given area of the facility during maintenance
procedures
written procedures must describe how pieces of machinery and equipment are supposed
to be de-energized and locked and tagged out
employees who work with hazardous materials be trained about the location of material
safety data sheets
equipment be unplugged prior to maintenance operations
8 points
Question 5
1. Which of the following is NOT part of the Occupational Safety & Health Administration (OSHA)
definition of “confined space”?
A space that is large enough and so configured that an employee can bodily enter and
perform assigned work
A space that has limited or restricted means for entry or exit
A space that is not designed for continuous employee occupancy
A space that requires a permit if entry is being made into the space
8 points
Question 6
1. Other than the color, what is the difference between “Danger” signs and “Caution” signs?
Include the citation for the OSHA standard where you found the answer to the question.
Your response should be at least 75 words in length.
12 points
Question 7
1. When is training required for employees involved in confined space entry? Include the citation
for the OSHA standard where you found the answer to the question.
Your response should be at least 75 words in length.
12 points
Question 8
1. How does OSHA define potable water? Include the citation for the OSHA standard where you
found the answer to the question.
Your response should be at least 75 words in length.
12 points
Question 9
1. What are the criteria for classifying a confined space as a permit required confined space?
Include the citation for the OSHA standard where you found the answer to the question.
Your response should be at least 75 words in length.
12 points
Question 10
1. Under the lockout/tagout standard, what is the difference between an authorized employee
and an affected employee? Include the citation for the OSHA standard where you found the
answer to the question.
Your response should be at least 75 words in length.
Purchase answer to see full
attachment
part one For this assignment you are to to watch: Shattered Glass Write a two…
Standard Project - WebServers. Instruction attached. Need all requirements, you do not have to make…
Read classmates post and respond with 100 words:The International Categorization of Diseases, Tenth Revision, Clinical…
Most Americans have at least 1 issue that is most important to them. Economic issues…
For this assignment, you are the court intake processor at a federal court where you…
Use a standard outline format to lay out how you are going to write your…